Fuji Electric ALPHA5 Smart - 7.2 Status Display

CHAPTER 7 MAINTENANCE AND INSPECTION
Status Display 7-3
7
7.2 Status Display
7.2.1 Initial State
When the main circuit power (L1, L2 and L3) is supplied to the servo amplifier, the seven-segment LED
of the keypad and the charge LED light up.
If nothing is displayed even though the power is supplied, contact us.
 Front view of servo amplifier
7.2.2 State at Alarm
In case of alarm, the servo amplifier will indicate alarm code on the key pad 7-segment LED.
Be sure to check the alarm code to clarify the cause of the alarm.
Frame2 Frame 3 Frame 1
*1 Keypad with 7-segment LED
*2 Charge LED
*1
*2
*1
*2
*1
*2
Frame 4
*1
*2