CHAPTER 8 SPECIFICATIONS
Specifications of Servomotor 8-3
8
Torque characteristics diagram (at 3-phase 200 [V] or single-phase 230 [V] source
voltage)
GYB201D5-□□2 (0.2 kW) GYB401D5-□□2 (0.4 kW)
GYB751D5-□□2 (0.75 kW)
These characteristics indicate typical values of each
servomotor combined with the corresponding servo
amplifier RYH series.
The rated torque indicates the value obtained when the
servo amplifier is installed to the following aluminum
heat sink.
Model GYB201D, 401D : 250 × 250 × 6 mm
Model GYB751D : 300 × 300 × 6 mm
To Next Page
Loading...