CHAPTER 14 PC LOADER
Communications Setting 14-13
14
Procedure of USB hardware search wizard
For Windows XP
[1] Using a USB cable, connect the PC with the servo operator.
Install the USB driver.
Select "Install from a list or specific location (Advanced)"
and click "Next."
[2] Select the USB driver file.
Select "Search for the best driver in these locations " and
place a check mark at "Include this location in the search ."
Click the "Browse" button and select the USB driver.
[3] Select the folder containing the driver file.
The USB driver is copied in the folder* where PC Loader is
installed.
* Example of ALPHA5 Series Looder
C:
\Program Files\ALPHA5 Series\Driver
Select the folder and click "OK."
To Next Page
Loading...