App. 1-1
Appendix 1 About Project for @E.Terminal
(No contents installed)
When you make new project for controller of @E.Terminal (No contents installed) by personal computer loader (SX-
programmer Expert/ Standard), download template for new project from our homepage.
The project for controller of @E. Terminal for MC is stored in backup CD.
(1) Download template
Access to our homepage, download from [Software libraries] of [Programmable controllers].
(Address: http://www.fesys.co.jp/eng/)
(2) Template file
• The file for SX-programmer Expert (SPH2000-48CR.zwt)
The file is compressed project type. Uncompress the project before use.
• The file for SX-programmer Standard (SPH2000-48CR.Sxt)
The file is template type. Register template in the loader before use.
(3) Order to register template to SX-Programmer Standard.
When you click [File]-[New], [Template selection] screen is displayed. Right click mouse under description area, and select
[import]. Select template file at [import] dialog, and click open.
Template of <SPH2000-48CR> is registered at [Template selection] screen.
(4) Notes
In [Execution band ratio setting] of [CPU running definition],
proportion of [Built-in] must be set as “0.”
To Next Page
Loading...
