Fuji Electric FLD-1 - 10.6.2 Check for analog input;output

122 INF-TN1FSC-E
10.6.2 Check for analog input/output
(1) Analog input
When the current input for CH1 and CH2 is 4-20mA or the voltage input is 1-5V, it is possible
to check for the input status.
(1) Move the cursor to “CHECK” on the MAINTENANCE
screen and press the
ENT
key to display the CHECK
screen.
(2) Check for the current input and the voltage output on
ANALOG INPUT of the CHECK screen.
Display unit
• Current input: mA
• Voltage input: V