Fuji Electric FLD-1 - Page 134

INF-TN1FSC-E 125
(1) To check for logger data
(1) When “LOGGER DATA” is selected on the SD
MEMORY CARD screen, the screen appears,
prompting you to select the logger data. Move the
cursor to the logger data fi le to be checked by the
or
key and press the
ENT
key.
(2) The contents of the logger data is displayed as text
data.
Turn back to the selection screen, press the
ESC
key.
(2) To check for print screen data
(1) When “PRINT SCREEN” is selected on the SD
MEMORY CARD screen, the screen appears,
prompting you to select the dump data. Move the
cursor to the screen data fi le to be checked by the
or
key and press the
ENT
key.
(2) The screen data is displayed.
Turn back from data screen display, press the
ESC
key.
(3) To check for fl ow profi le data
(1) When you select “FLOW PROFILE DATA” on the
SD memory card screen.
File name list for “FLOW PROFILE DATA” is
displayed.