140 INF-TN1FSC-E
10.8 Contents of errors in status display
Use this page for checking the status of this equipment.
The present status is displayed in the measurement screen, propagation time difference receiv-
ing waveform screen, and fl ow velocity profi le screen.
If any error was found, take actions in accordance with countermeasures against display con-
tents and "12. ERROR AND REMEDY".
10.8.1 How to check status display
(1) For checking an error in the measurement screen
Move the cursor to the status display and then press
the
ENT
key.
(2) If multiple errors were found
Move the cursor to the error item to be corrected us-
ing
, keys, and then press the
ENT
key.
(3) The troubleshooting screen appears.
[◄] and [►] are displayed, if the troubleshooting screen is of multiple pages.
Change the page using
,
keys.
To Next Page
Loading...
