Fuji Electric FLD-1 - 7. INPUT OF PIPING SPECIFICATIONS; 7.1 Display of pipe setup screen

INF-TN1FSC-E 21
7. INPUT OF PIPING SPECIFICATIONS
Before installing the detector, set the specifi cations of a pipe in the main unit to allow measurements.
Caution) Measurements cannot be accomplished without these settings.
7.1 Display of pipe setup screen
(1) Press the
MENU
key on the “MEASURE” screen to
display the “MENU” screen.
(2) Check that the “SITE SETUP” is reversed from
white to blue.
ENT
(3) Press the
ENT
key, and the “SITE SETUP” screen
is displayed.
(4) Press the key, and move the cursor to “2: PRO-
CESS SETTING”.
ENT