70 INF-TN1FSC-E
(1) “DAMPING” : when changing output response
Used for attenuating the variation of measured value.
A time constant is set. (Response time of about 63%)
Settable range: 0.0 to 100.0sec in 0.1 sec steps
63%
Time
Response time
Flow rate
[Operation]
(1) Press the
or key on the OUTPUT CONTROL
screen and select “DAMPING”. Then, press the
ENT
key, and the cursor moves to the set item, enabling
you to set the response time.
(2) Move the digit by pressing the
or key and
enter numeric values by using the
or key.
After entry, press the
ENT
key for setting.
To Next Page
Loading...
