Fuji Electric FLD-1 - 10.2.2 Logger data file format

INF-TN1FSC-E 79
10.2.2 Logger data fi le format
One logger fi le is composed of fi les of two types indicated below. The data fi le is stored as
divided by 65,500 lines for permitting high-speed access and due to restrictions in the maximum
number of lines of CSV display of Microsoft Excel.
File type File name Remarks
Confi guration fi le (Logging name)_(date)_(hour).ini Means logger start time and relevant logger
data fi les.
Data fi le (Logging name)_(date)_(hour).csv Logging data in a specifi c period
The maximum number of data fi les in a logger is 20 fi les in case of a “CONTINUOUS” logger,
and is 550 fi les in case of a ”SET TIME” logger. The appointed time logger is of one fi le per
day.
Note) After reaching the maximum data fi le, the logging will be stopped.
The logger data list shows the following names excluding extension (.ini) of logger confi gura-
tion fi les.
• Logger … “Logger name_(start date)_(start hour)”
• Quick logger … “QUICK__(start date)_(start hour)”
If capacity shortage arises during logging operation, logging operation stops with the following
screen displayed.
When this screen appears, replace the SD memory card immediately.
Press the
ESC
key, or remove SD memory card, the message will be cleared.
Move the cursor to “STOP” to stop logging, press the
ENT
key, and once remove the memory
card.