Fuji Electric FLD-1 - 10.2.4 “LOGGER DATA”: when checking or printing logged data

INF-TN1FSC-E 83
10.2.4 “LOGGER DATA”: when checking or printing logged data
(1) When checking logged data on screen
[Operation]
(1) Press the
or key on the LOGGER screen,
select “LOGGER DATA” and press the
ENT
key.
(2) When the LOGGER DATA screen appears, press the
ENT
key.
(3) The MODE screen appears.
Select “GRAPH DISP.” and press the
ENT
key.
(4) Select the name (No.) of logger data by pressing the
or key. and press the
ENT
key. The graph dis-
play screen opens.