Fuji Electric FLD-1 - 10.3 Setting of system (SYSTEM SETUP screen); 10.3.1 BASIC SETUP: when setting the system

88 INF-TN1FSC-E
(1) “CLOCK”: when setting the clock (set the present time)
(1) Press the or key on the BASIC SETUP screen
and select “CLOCK”.
Press the
ENT
key, and the cursor moves to “DATE
DISPLAY”.
Press the
ENT
key to display the Date DISPLAY
screen.
Select the display of date by the
or key, and
press the
ENT
key.
YYYY : Year
MM : Month
DD : Day
10.3 Setting of system (SYSTEM SETUP screen)
This system allows you to accomplish the BASIC SETUP (system setup such as setup of clock
and measurement unit), the ANALOG INPUT/OUTPUT (analog input setting and input/output
calibration) and the CALORIE MODE (setting of mode, operation and temperature).
10.3.1 BASIC SETUP: when setting the system
(1) Select “BASIC SETUP” on the SYSTEM screen.
Press the
ENT
key to display the BASIC SETUP
screen.