INF-TN1FSC-E 89
(2) Move the cursor to SET DATE/TIME by the or
key and press the
ENT
key so that time and date
can be set.
Move the digit by the
or key and enter numeric
values by the
or key.
After entry, press the
ENT
key.
The setup time is set at this point.
Setup contents
2008/02/01 10:03
(year, month, day, hour, minute)
When using the total or the data logger or the timer function of the printer, time setting can not be
operated. Stop the timer function, and then set it again.
CAUTION
To Next Page
Loading...
