Fuji Electric FRENIC-ECO - Read Operation; Error Screens

3-32
2) Read Operation
List of data copy operations
Select desired operation by moving the cursor with
/
key.
Data selection screen
Select desired data by moving the cursor with
/ key.
To go back to List of data copy operations, press
key.
Confirmation screen
If "Read" is actually performed, the data read out from the
inverter will overwrite the data held in this memory area in the
keypad. If OK, press
key.
To go back to Data selection screen, press
key.
"In progress" screen
A bar indicating progress appears in the bottom.
Completion screen
Indicates that Read operation has completed successfully.
To go back to List of data copy operations, press
key.
Error screens
If you press / key during Read operation, the
operation under way will be aborted, and this Error screen will
appear.
(Note)
Once aborted, all the data held in the keypad’s
memory would be deleted.
If a communication error is detected between the keypad and
the inverter, this Error screen will appear.
Figure 3.20 Menu Transition for "READ"
If an ERROR screen or an ERROR Ver. Screen appears during operation, press the key to reset the
error condition. When Reset is complete, the screen will go back to List of data copy operations.
Press key to finalize desired operation.
Press key to finalize desired data.
Press key to start Read operation.
Upon completion, Completion screen automatically appears.