5.3 Description of Function Codes 5.3.8 J codes (Applied functions)
Dedicated reverse rotation brake signal function codes
If necessary to make individual adjustments with forward rotation or reverse rotation, do so with the following
dedicated reverse rotation function codes. If data = 999 (factory default), operation will be performed with the J code
function code setting value.
0.00 to 300.00%, 999: operation based
on J68 setting value
100% = inverter rated
current
Brake-release
frequency/speed
0.0 to 25.0 Hz, 999: operation based on
J69 setting value
0.000 to 5.000 s, 999: operation based
on J70 setting value
0.00 to 300.00%, 999: operation based
on J95 setting value
100% = motor rated torque
Brake-apply
frequency/speed
0.0 to 25.0 Hz, 999: operation based on
J71 setting value
0.000 to 5.000 s, 999: operation based
on J72 setting value
To Next Page
Loading...
