Options
Note)
For the inverter type FRNF12C1S-2U**, the symbols ** are replaced with any of the following numeral codes:
21 (Braking resistor built-in type), None (Standard type)
The braking resistor built-in type is limited to the inverters for 2HP or larger.
NEMA1 kit, when fitted to the FRENIC-Mini
series, protects the inverter body with the
structure that conforms to the NEMA1
standard (approved as UL TYPE1).
Power supply voltage Option type
Three-phase 230V
Three-phase 460V
Single-phase 230V
Single-phase 115V
A
B
C
A
B
A
A
B
C
C
NEMA1-0.2C1-2
NEMA1-0.4C1-2
NEMA1-0.75C1-2
NEMA1-2.2C1-2
NEMA1-3.7C1-2
NEMA1-0.4C1-4
NEMA1-0.75C1-4
NEMA1-2.2C1-2
NEMA1-3.7C1-2
NEMA1-0.2C1-2
NEMA1-0.4C1-2
NEMA1-0.75C1-7
NEMA1-1.5C1-7
NEMA1-3.7C1-2
NEMA1-0.2C1-6
NEMA1-0.4C1-6
NEMA1-0.75C1-6
Applicable
Inverter type
FRNF12C1S-2U**
FRNF25C1S-2U**
FRNF50C1S-2U**
FRN001C1S-2U**
FRN002C1S-2U**
FRN003C1S-2U**
FRN005C1S-2U**
FRNF50C1S-4U**
FRN001C1S-4U**
FRN002C1S-4U**
FRN003C1S-4U**
FRN005C1S-4U**
FRNF12C1S-7U
FRNF25C1S-7U
FRNF50C1S-7U
FRN001C1S-7U
FRN002C1S-7U
FRN003C1S-7U
FRNF12C1S-6U
FRNF25C1S-6U
FRNF50C1S-6U
FRN001C1S-6U
MODEL
NEMA1 kit (NEMA1-C1-)
MODEL A MODEL B MODEL C
To all our customers who purchase Fuji Electric FA Components & Systems' products:
Please take the following items into consideration when placing your order.
(1) The product warranty period is ''1 year from the date of purchase'' or 24 months from the
manufacturing date imprinted on the name place, whichever date is earlier.
(2) However, in cases where the use environment, conditions of use, use frequency and times used,
etc., have an effect on product life, this warranty period may not apply.
(3) Furthermore, the warranty period for parts restored by Fuji Electric's Service Department is ''6
months from the date that repairs are completed.''
As a rule, the customer is requested to carry out a preliminary trouble diagnosis. However, at the
customer's request, this company or its service network can perform the trouble diagnosis on a
chargeable basis. In this case, the customer is asked to assume the burden for charges levied in
accordance with this company's fee schedule.
Regardless of whether a breakdown occurs during or after the free of charge warranty period, this
company shall not be liable for any loss of opportunity, loss of profits, or damages arising from
special circumstances, secondary damages, accident compensation to another company, or
damages to products other than this company's products, whether foreseen or not by this company,
which this company is not be responsible for causing.
When requesting an estimate and placing your orders for the products included in these materials,
please be aware that any items such as specifications which are not specifically mentioned in the
contract, catalog, specifications or other materials will be as mentioned below.
In addition, the products included in these materials are limited in the use they are put to and the place
where they can be used, etc., and may require periodic inspection. Please confirm these points with
your sales representative or directly with this company.
Furthermore, regarding purchased products and delivered products, we request that you take adequate
consideration of the necessity of rapid receiving inspections and of product management and
maintenance even before receiving your products.
1. Free of Charge Warranty Period and Warranty Range
2. Exclusion of Liability for Loss of Opportunity, etc.
Concerning models (products) which have gone out of production, this company will perform repairs
for a period of 7 years after production stop, counting from the month and year when the production
stop occurs. In addition, we will continue to supply the spare parts required for repairs for a period of
7 years, counting from the month and year when the production stop occurs. However, if it is
estimated that the life cycle of certain electronic and other parts is short and it will be difficult to
procure or produce those parts, there may be cases where it is difficult to provide repairs or supply
spare parts even within this 7-year period. For details, please confirm at our company's business
office or our service office.
3. Repair Period after Production Stop, Spare Parts Supply Period (Holding Period)
In the case of standard products which do not include settings or adjustments in an application
program, the products shall be transported to and transferred to the customer and this company shall
not be responsible for local adjustments or trial operation.
4. Transfer Rights
The cost of purchased and delivered products does not include the cost of dispatching engineers or
service costs. Depending on the request, these can be discussed separately.
5. Service Contents
Above contents shall be assumed to apply to tansactions and use of the country where you
purchased the products. Consult the local supplier or Fuji for the detail separately.
6. Applicable Scope of Service
1-1 Free of charge warranty period
(1) In the event that breakdown occurs during the product's warranty period which is the responsibility
of Fuji Electric, Fuji Electric will replace or repair the part of the product that has broken down free
of charge at the place where the product was purchased or where it was delivered. However, if
the following cases are applicable, the terms of this warranty may not apply.
1) The breakdown was caused by inappropriate conditions, environment, handling or use
methods, etc. which are not specified in the catalog, operation manual, specifications or other
relevant documents.
2) The breakdown was caused by the product other than the purchased or delivered Fuji's
product.
3) The breakdown was caused by the product other than Fuji's product, such as the customer's
equipment or software design, etc.
4) Concerning the Fuji's programmable products, the breakdown was caused by a program other
than a program supplied by this company, or the results from using such a program.
5) The breakdown was caused by modifications or repairs affected by a party other than Fuji
Electric.
6) The breakdown was caused by improper maintenance or replacement using consumables, etc.
specified in the operation manual or catalog, etc.
7) The breakdown was caused by a chemical or technical problem that was not foreseen when
making practical application of the product at the time it was purchased or delivered.
8) The product was not used in the manner the product was originally intended to be used.
9) The breakdown was caused by a reason which is not this company's responsibility, such as
lightning or other disaster.
(2) Furthermore, the warranty specified herein shall be limited to the purchased or delivered product
alone.
(3) The upper limit for the warranty range shall be as specified in item (1) above and any damages
(damage to or loss of machinery or equipment, or lost profits from the same, etc.) consequent to
or resulting from breakdown of the purchased or delivered product shall be excluded from
coverage by this warranty.
1-2 Warranty range
1-3. Trouble diagnosis
Warranty
29
To Next Page
Loading...
