Fuji Electric FVR-C11S-7EN Series - Carrying; Storage and Transportation

1-4 1 Before Usin
g
This Product
FVR-C11S-EN
1
Table 1-5-1 Stora
g
e and transportation environment
1-4 Carr
y
in
g
Alwa
y
s hold the main unit while carr
y
in
g
this product.
If it is carried b
y
the cover or parts and not the main unit, the product
ma
y
be dama
g
ed or dropped.
Force must not be applied to the inverter cover durin
g
carr
y
in
g
because
it is made of plastic.
1-5 Stora
g
e and
transportation
Store and transportation this product under the conditions listed in
Table 1-5-1.
Item Specifications
Stora
g
e tempera-
ture Transportation
temperature
-25 to +65 °C Condensation or formation of ice must not be
caused b
y
sudden temperature chan
g
es.
Relative humidit
y
5 to 95%
1)
Atmosphere The product must not be exposed to dust, direct sunli
g
ht, corrosive
g
as, in-
flammable
g
as, oil mist, vapor, water drops, or vibration. There must be no
salt in the atmosphere.
Air pressure 86 to 106kPa (Durin
g
stora
g
e)
70 to 106kPa (Durin
g
transportation)
1) A lar
g
e chan
g
e in temperature within this humidit
y
ran
g
e ma
y
cause condensation
or formation of ice. Do not store this product at a place where such chan
g
es occur.
[Stora
g
e precautions]
1. Do not locate this product directl
y
on a floor; place it on a rack or
shelf.
2. To store the product in a severe atmosphere, pack it in vin
y
l sheet.
3. If the product must be stored at a place where it ma
y
be affected b
y
humidit
y
, insert a dr
y
in
g
a
g
ent such as silica
g
el and pack it in vin
y
l
sheet.