App.1-1
Appendix 1 Installing USB Driver
When connecting an SPF series PLC and personal computer using a loader connecting cable (Type: NA0H-CUV), you need to
install the USB driver for SPF into the personal computer. Before connecting the loader connecting cable, be sure to install the
USB driver. If you connect the loader connecting cable before installing the USB driver, remove the cable once, install the USB
driver, and then reconnect the cable.
<Installation procedure>
Click [Start] of Windows > [All Programs] > [SX-Programmer Standard V3] > [Tools] > [USB Driver For SPF].
* The installation procedure is the same for SX-Programmer Expert (D300win).
On the following dialog box, click the [Next] button.
To Next Page
Loading...
