Fuji Electric MICREX-SX series SPF - Example of Address Assignment

2-9
Section 2 System Conguration
2-3-2 Example of address assignment
1) Example of a system consisting only of a main unit with 40 points
(Word address)
%IW0.0 (WX0.0)
%IW0.1 (WX0.1)
%QW0.4 (WY0.4)
(Bit address)
%IX0.0.0 to %IX0.0.15 (X0.00 to X0.0F)
%IX0.1.0 to %IX0.1.7 (X0.10 to X0.17)
%QX0.4.0 to QX0.4.15 (Y0.40 to Y0.4F)
0F
Input: 24 points
Main unit with 40 points
Unit No. 0
Input: 24 points
output: 16 points
Output: 16 points
2) Example of a system in which expansion units are connected to a main unit with 60 points
0F
Input: 36 points
Input: 14 points
Input:
4 points
Output:
4 points
Output: 10 points
Main unit with 60 points
Unit No. 0
Input: 36 points
output: 24 points
Output: 24 points
Output: 16 points
Expansion
right side unit
Unit No. 3
Output: 16 points
Expansion
right side unit
Unit No. 2
Input: 4 points
output: 4 points
Expansion
right side unit
Unit No. 1
Input: 14 points
output: 10 points
(Word address)
%IW0.0 (WX0.0)
%IW0.1 (WX0.1)
%IW0.2 (WX0.2)
%QW0.4 (WY0.4)
%QW0.5 (WY0.5)
%IW1.0 (WX1.0)
%QW1.1 (WY1.1)
%IW2.0 (WX2.0)
%QW2.1 (WY2.1)
%QW3.0 (WY3.0)
(Bit address)
%IX0.0.0 to %IX0.0.15 (X0.00 to X0.0F)
%IX0.1.0 to %IX0.1.15 (X0.10 to X0.1F)
%IX0.2.0 to %IX0.2.3 (X0.20 to X0.23)
%QX0.4.0 to %QX0.4.15 (Y0.40 to Y0.4F)
%QX0.5.0 to %QX0.5.7 (Y0.50 to Y0.57)
%IX1.0.0 to %IX1.0.13 (X1.00 to X1.0D)
%QX1.1.0 to %QX1.1.9 (Y1.10 to Y1.19)
%IX2.0.0 to %IX2.0.3 (X2.00 to X2.03)
%QX2.1.0 to %QX2.1.3 (Y2.10 to Y2.13)
%QX3.0.0 to %QX3.0.15 (Y3.00 to Y3.0F)