Fuji Electric MICREX-SX series SPF - Analog Input;Output Unit (NA0 AW06-MR); Specifications

3-17
Section 3 Specications
3-6-3 Analog input/output unit (NA0AW06-MR)
(1) Specications
Item Specication
Type NA0AW06-MR
No. of input channels 4 channels
Input impedance Voltage: 63.2 k
W
, Current: 250
W
Maximum allowable input Voltage: ±15V, Current: 30mA
Input range
-10 to +10V, -5 to +5V, 0 to 10V, 0 to 5V
-20 to 20mA, -10 to 10mA, 0 to 20mA, 0 to 10mA
(Collectively set for all channels by the jumper pin in the unit)
Resolution 12 bits or 14 bits (Set for each channel by the program loader.)
Overall accuracy ±1% *1
A/D conversion value INT type
Sampling period Synchronized with the scan of the main unit.
Moving average 1 to 16 times (Set for individual channels by the program loader.)
No. of output channels 2 channels
External load resistance Voltage output: 500
W
to 1 M
W
, Current output: 0 to 500
W
or less
Analog output range
-10 to +10V, -5 to +5V, 0 to 10V, 0 to 5V
-20 to 20mA, -10 to 10mA, 0 to 20mA, 0 to 10mA
(Collectively set for all channels by the jumper pin in the unit)
Resolution 14 bits
Overall accuracy ±1%
Data type of digital output value INT type
Output period Synchronized with the scan of the main unit.
External wire connections 8-pole terminal block (M3) x 2, Tightening torque: 0.59 to 0.78 N·m
Applicable wire size AWG#22-18 * Be sure to use shielded twisted pair cables.
Status indication 5V power supply display, ON when normal (red)
Isolation method Not isolated
Occupied words 6 words
External power supply 24V DC, 103mA *Wiring length: 10m or less
Internal current consumption 5V DC, 35mA
Dimensions 40 (W) x 90 (H) x 80 (D) (mm)
*1 The overall accuracy is the specication for when noise described in “Electrical service conditions” is not applied.
If noise is applied, the overall accuracy may exceed the above specication.