Fuji Electric MICREX-SX series - Conversion Characteristics; Conversion Characteristics of Analog Voltage Input

Section 2 Specifications
2-6
Analog input
voltage (V)
Digital output value
(INT type)
(10250) 16400
(10000) 16000
Practicable digital
output range
(-250) -400
0.9
0
1
5 5.1
(Note)
Gain value
Offset value
2-3 Conversion Characteristics
2-3-1 Conversion characteristics of analog voltage input
Output range Digital input range
0 to 5 V 0 to 16000 0 to 10000
1 to 5 V 0 to 16000 0 to 10000
0 to 10 V 0 to 16000 0 to 10000
-10 to 10 V -8000 to 8000 0 to 10000
1) Characteristic curve for the input range of 0 to 5 V
2) Characteristic curve for the input range of 1 to 5 V
Note: Parenthesized figures mean the values when the unit of digital output value is % in Fixed Range Operation mode (excl.
NP1AWH6-MR). In software Set Range Operation mode, scaling is necessary to express output values by the %.
Analog input voltage (V)
Digital output value
(INT type)
(10250) 16400
(10000) 16000
Practicable digital
output range
-400 (-250)
-0.125
5 5.125
(Note)
Gain value
Offset value
0
Analog input
voltage (V)
Digital output value
(INT type)
16400
16000
Practicable digital
output range
-4000
0
1
5 5.1
Gain value
Offset value
<NP1AWH6-MR only>