Fuji Electric MICREX-SX series - Conversion Characteristics of Analog Voltage Output

Section 2 Specifications
2-10
2-3-3 Conversion characteristics of analog voltag output
Output range Digital input range
0 to 5 V 0 to 16000 0 to 10000
1 to 5 V 0 to 16000 0 to 10000
0 to 10 V 0 to 16000 0 to 10000
-10 to 10 V -8000 to 8000 -
1) Characteristic curve for the output range of 0 to 5 V
2) Characteristic curve for the output range of 1 to 5 V
Note 1: Parenthesized figures mean the values when the unit of digital input value is % in Fixed Range Operation mode (excl.
NP1AWH6-MR). In Software Set Range Operation mode, scaling is necessary to express input values by the %.
Note 2: If parameter mode is activated in Software Set Range Operation mode, analog output value becomes equal to the
offset value.
2-3 Conversion Characteristics
Digital input value
(INT type)
Analog output voltage (V)
5.125
5
Practicable analog
output range
(-250) -400
-0.125
16000
(10000)
16400
(10250)
(Note)
Gain value
Offset value
0
Digital input value
(INT type)
Analog output voltage (V)
Practicable analog
output range
(-250) -400
-0.9
0
1
16000
(10000)
5.1
5
16400
(10250)
(Note)
Gain value
Offset value