Fuji Electric MICREX-SX series - Functional Specifications

2-11
Section 2 Specifications
3) Characteristic curve for the output range of 0 to 10 V
4) Characteristic curve for the output range of -10 to 10 V
Note 1: Parenthesized figures mean the values when the unit of digital input value is % in Fixed Range Operation mode (excl.
NP1AWH6-MR). In Software Set Range Operation mode, scaling is necessary to express input values by the %.
Note 2: For the range of -10 to 10 V, the unit of % cannot be selected by switch setting.
Note 3: If parameter mode is activated in Software Set Range Operation mode, analog output value becomes equal to the
offset value, except that 0 V is output for the range of -10 to 10 V.
2-3 Conversion Characteristics
Digital input value
(INT type)
Analog output voltage (V)
10.25
10
Practicable analog
output range
(-250) -400
-0.25
16000
(10000)
16400
(10250)
(Note)
Gain value
Offset value
0
Digital input value
(INT type)
Analog output voltage (V)
10.25
10
Practicable analog
output range
-10.25
-10
8000
(10000)
-8000
(0)
-8200
(-125)
8200
(10125)
(Note)
Gain value
0
Offset value