Fuji Electric MICREX-SX series - Page 2

Preface
This user's manual describes the system configuration, specifications and operating method of the following modules for
MICREX-SX series:
 Multi-range analog 8ch voltage input module (type: NP1AXH8V-MR)
 Multi-range analog 8ch current input module (type: NP1AXH8I-MR)
 Multi-range analog 8ch voltage output module (type: NP1AYH8V-MR)
 Multi-range analog 8ch current output module (type: NP1AYH8I-MR)
 Multi-range analog 4ch voltage output module (type: NP1AYH4V-MR)
 Multi-range analog 4ch current output module (type: NP1AYH4I-MR)
 Multi-range analog 6ch input/output module (type: NP1AWH6-MR)
Read this manual carefully to ensure correct operation. When using modules or peripheral devices, be sure to read the
corresponding user's manuals listed below:
<SX-Programmer Expert (D300win)>
Title Manual No. Contents
User's Manual Instructi on, MICREX-SX series FEH200 Explains the memory, language and system definitions of the
MICREX-SX series.
User's Manual Hardware,
MICREX-SX series SPH
FEH201 Explains the system configuration, the speci fications and
operations of modules i n the MICREX-SX series.
User's Manual D300win <Reference>,
MICREX-SX series
FEH257 Explains the methods for installing, the functions and the
oper ations of D300winV3.
User's Manual D 300win <LD/F B D E ditor>,
MICREX-SX series
FEH257-1 Explains the operati ons of LD/FBD added to D300winV3.
<SX-Programmer Standard (Standard loader)>
* This manual is structured such that you can consult it, whether you use SX-Programmer Expert (D300win ) or SX-programmer
standard (Standard loader).
* In addition to the above manuals, the following Fuji Electric FA Components & Systems Co., Ltd. site offers various manuals
and technical documents associated with MICREX-SX.
URL http://www.fujielectric.co.jp/fcs/eng/
Notes
1. This manual may not be reproduced in whole or part in any form without prior written approval by the manufacturer.
2. The contents of this manual (including specifications) are subject to change without prior notice.
3. If you find any ambiguous or incorrect descriptions in this manual, please write them down (along with the manual No.
shown on the cover) and contact FUJI.
Title Manual No. Contents
User's Manual Instructi on, MICREX-SX series FEH588 Explains the memory, language and system definitions of the
MICREX-SX series.
User's Manual Hardware,
MICREX-SX series SPH
FEH201 Explains the system configuration, the speci fications and
operations of modules i n the MICREX-SX series.
User's Manual SX-Programmer Standard
< Reference>, MICREX-SX series
FEH590 Explains the functions and the operati ons of SX-Programmer
Standard.