Fuji Electric MICREX-SX series - Section 1 General; Contents; List of Modules; Supported Versions of Program Loader

1-1
Section 1 General
Analog modules listed below are described in this manual.
1-2 Supported Versions of Program Loader
Type
Analog voltage input
0to5V,1to5V,
0 to 10V, -10 to 10V
Analog current input
4 to 20mA, 0 to 20mA,
-20 to 20mA
Analog voltage output
0to5V,1to5V,
0 to 10V, -10 to 10V
Analog current output
0 to 20mA, 4 to 20mA
NP1AXH8V-MR 8 channels - - -
NP1AXH8I -MR - 8 channels - -
NP1AY H8VMR - - 8 channels -
NP1AY H8I-MR - - - 8 channels
NP 1AYH4V-MR - - 4 channels -
NP1AYH4I-MR---4channels
NP1AWH6-MR 4 channels 2 channels
Type
D300winV2
NP4H-SEDBV2
SX-Programmer Expert
D300winV3
NP4H-SEDBV3
SX-Programmer Standard
NP4H-SWN
NP1AXH8V-MR
V2.2.0.0 or later V3.0.0.0 or later V2.0.0.0 or later
NP1AXH8I -MR
NP1AYH8VMR
NP1AYH8I -MR
NP 1AYH4V-MR
NP 1AYH4I-MR
NP 1AWH6-MR - V3.3.3.0 or later V2.2.3.0 or later
1-1 List of Modules