Fuji Electric MONITOUCH TS1070 - I;O Test Procedures

5
2. Main Menu Screen 5-29
TS Series Operations
9. I/O Test
Pressing the [I/O Test] switch on the Main Menu drop-down window brings up the I/O Test screen.
This screen is used to check that there is no problem with the TS interfaces and touch switch
operation.
Moves to the touch switch
test screen. (page 5-35)
Moves back to
the Main Menu
screen.
(page 5-3)
Performs a
COM1/COM2/COM3
interface test.
(page 5-30)
I/O Test screen
Moves to the Print
Test screen.
(page 5-34)
Main Menu drop-down window
Used to check
USB connections.
(page 5-34)
Moves to the
Keyboard
Selection screen.
(page 5-37)