Fuji Electric Monitouch V9 Series - Page 115

4.1 PLC Connection 4-1
4.1 PLC Connection
The PLC models shown below can be connected.
Serial Connection
*1 For the ladder transfer function, see the V9 Series Reference Manual.
Ethernet Connection
*1 The PC2J CPU may not be used depending on the CPU version. For more information, refer to the PLC manual issued by the
manufacturer.
*2 For KeepAlive functions, see “1.3.2 Ethernet Communication”.
*3 For the ladder transfer function, see the V9 Series Reference Manual.
PLC Selection on
the Editor
PLC Unit/Port Signal Level
Connection
Ladder
Transfer
*1
CN1 MJ1/MJ2
TOYOPUC
PC2
L2
PC/CMP-LINK
(TPU-5174)
RS-485 Wiring diagram 1 - C4 Wiring diagram 1 - M4
PC/CMP2-LINK
(TPU-5138)
3PORT-LINK
(TLU-2769)
2PORT-LINK
(TLU-2695)
PC3J/2J
PC/CMP-LINK
(THU-2755)
PC/CMP2-LINK
(THU-5139)
2PORT-LINK
(THU-2927)
PC3J
Built-in link (L1)
(TIC-5339)
Optional link (L2)
(TIU-5366)
PC3JL
Built-in link (L1)
(TIC-5783)
Optional link (L2)
(TIC-5783)
PC3JD
Built-in link (L1)
(TIC-5642)
PLC Selection on the Editor CPU Unit/Port TCP/IP UDP/IP Port No.
Keep
Alive
*2
Ladder
Transfer
*3
TOYOPUC (Ethernet)
PC3J
PC2J
*1
FL/ET-T-V2
(THU-5998)
As desired
1025 to 65534
(Max. 8 units)
FL/ET-T-V2H
(THU-6289)
EN-I/F-T (THU-5781)
TOYOPUC
(Ethernet PC10 mode)
PC10G
(version 3.00 or later)
PC10GE
Built-in Ethernet
(L1/L2)
As desired
1025 to 65534
(Max. 32 units)