13.2 Temperature Controller/Servo/Inverter Connection 13-37
Return data: Data stored from temperature controller to V series
*1 8000 (HEX): broadcasting
Operation instructions
1 - 8
(PLC1 - 8)
n + 2
AT cancellation
0A00H: Channel 1
0A10H: Channel 2
0A20H: Channel 3
0A30H: Channel 4
09F0H: All channels
3
Write mode
0400H: Backup mode
0401H: RAM write mode
0500H: Save RAM data
0600H: Software reset
0700H: Move to set area 1
0800H: Move to protect level
Auto/manual
0900H: Channel 1 Auto mode
0901H: Channel 1 Manual mode
0910H: Channel 2 Auto mode
0911H: Channel 2 Manual mode
0920H: Channel 3 Auto mode
0921H: Channel 3 Manual mode
0930H: Channel 4 Auto mode
0931H: Channel 4 Manual mode
09F0H: All channels Auto mode
09F1H: All channels Manual mode
0B00H: Initialize
Unlatch
0C00H: Channel 1 Warning unlatch
0C10H: Channel 2 Warning unlatch
0C20H: Channel 3 Warning unlatch
0C30H: Channel 4 Warning unlatch
0CF0H: All channels Warning unlatch
SP mode
0D00H: Channel 1 Local SP
0D01H: Channel 1 Remote SP
0D10H: Channel 2 Local SP (Cascade open)
0D11H: Channel 2 Remote SP (Cascade close)
Contents F0 F1 (= $u n) F2
To Next Page
Loading...