Fuji Electric Monitouch V9 Series - Page 339

13-52 13. OMRON
V600-CD1D
(Default: OFF (all))
DIP switch 2
SW2
SW3
SW4
SW5
Unit No. (Valid only when “1 : N” is selected by SW6. When “1 : 1” is selected, set all switches to the
OFF positions.)
SW6
Communication protocol
OFF: 1 : 1
ON: 1 : N
SW7
Terminating resistance at sending side (valid only for RS-422)
OFF: Not provided
ON: Provided
SW8
Terminating resistance at receiving side (valid only for RS-422)
OFF: Not provided
ON: Provided
DIP Switch Setting
DIP switch 1
SW2
SW3
Baud rate setting
SW4
SW5
SW6
Communication format
SW8 Always OFF
DIP switch 2
SW3
SW4
SW5
Unit No. (Valid only when “1 : N” is selected by SW6. When “1 : 1” is selected, set all switches to the
OFF positions.)
SW6
Communication protocol
OFF: 1 : 1
ON: 1 : N
SW7
SW8
Always OFF
DIP Switch Setting
ON
12
345
6
78
SW2 SW3 SW4 SW5 No. SW2 SW3 SW4 SW5 No.
OFF OFF OFF OFF 0 ON OFF OFF OFF 8
OFF OFF OFF ON 1 ON OFF OFF ON 9
OFF OFF ON OFF 2 ON OFF ON OFF 10
OFF OFF ON ON 3 ON OFF ON ON 11
OFF ON OFF OFF 4 ON ON OFF OFF 12
OFF ON OFF ON 5 ON ON OFF ON 13
OFFONONOFF 6 ONONONOFF14
OFF ON ON ON 7 ON ON ON ON 15
12
345678
ON
SW2 SW3 Baud Rate
OFF ON 4800
ON OFF 9600
ON ON 19200
SW4 SW5 SW6 Data Length Stop Bit Parity
OFF OFF OFF
7
2
Even
OFF OFF ON Odd
OFF ON OFF
1
Even
OFF ON ON Odd
ON OFF OFF
8
2
None
ON OFF ON
1ON ON OFF Even
ON ON ON Odd
ON
12
345
6
78
SW3 SW4 SW5 Unit No.
OFF OFF OFF 0
OFF OFF ON 1
OFF ON OFF 2
OFF ON ON 3
ON OFF OFF 4
ON OFF ON 5
ON ON OFF 6
ON ON ON 7