15-6 15. Panasonic
Operation mode setting switch (lower)
Station number setting switch (lower)
(Underlined setting: default)
AFP3462 / AFP5462 (CCU)
DIP switch setting
AFP3463 (C-NET Link Unit)
DIP switch setting
Available Device Memory
The available setting range of device memory varies depending on the PLC model. Be sure to set within the range available for
the PLC to be used. Use [TYPE] when assigning indirect device memory for macro programs.
Switch Setting Contents
6ON
Baud rate: 19200 bps7ON
8OFF
Switch Setting
The tens place The ones place 01
to 32
Switch Setting Contents
1ON
Baud rate: 19200 bps2OFF
3OFF
4 ON Data length: 8 bits
5ONWith parity
6OFFOdd
7OFFStop bit 1
8 OFF CS, CD invalid
Switch Setting Contents
1 OFF Baud rate: 19200 bps
2 ON Data length: 8 bits
3ONWith parity
4OFFOdd
5OFFStop bit 1
6OFF-
7OFF-
8OFF-
Device Memory TYPE Remarks
DT (data register) 00H
X (external input) 01H WX as word device, read only
Y (external output) 02H WY as word device
R (internal relay) 03H WR as word device, including special relays
L (link relay) 04H WL as word device
LD (link register) 05H
FL (file register) 06H FP2, 3, 5, 10 only
SV (timer, counter/set value) 07H
EV (timer, counter/elapsed time) 08H
T (timer/contact) 09H Read only
C (counter/contact) 0AH Read only
To Next Page
Loading...