Fuji Electric PEN102J1C - EBM and REPO;REMOTE Configuration

29
６-１-１ EBM set
Figure ６-2 EBM set
It changes into the “EBM set” display in pushing the SET button. Push、▲
button/▼ button when you change the content display. The content is
changed when the SET button is pushed by the content that changes
and it moves to the next item display. Push the ESC button when it
returns to the “EBM set” item.
・Set this when you increase EBM. The deterioration of the battery is fast when
using UPS without setting this.
・Do not change initialization with EBM not increased.
６-１-２ REPO/REMOTE
Figure ６-3 REPO/REMOTE
CONF I GURAT I ON
EBM SET
EBM SET
0SET
EBM SET
1SET
EBM SET
2SET
Factory
Setting
〆
CONF I GURAT I ON
REPO／REMOTE
REPO／REMOTE
INVALIDITY
REPO／REMOTE
REPO SET
REPO／REMOTE
REMOTE SET
Factory
Setting
〆