Fuji Electric PEN102J1C - Page 55

36
changes and it moves to the next item display. Push the ESC button when
it returns to the “AUTOSTART” item.
・This setting is function of reboot by utility return.
・The output is automatically output by Utility return after shutdown by low
battery when it is effective.
・The output is not automatically output by Utility return after shutdown by low
battery when it is invalidity.
６-１-１２ Auto battery test
Figure ６-13 Auto battery test
It changes into the “Auto battery test” display in pushing the SET button.
Push、▲ button/▼ button when you change the content display. The
content is changed when the SET button is pushed by the content that
changes and it moves to the next item display. Push the ESC button when
it returns to the “Auto battery test” item.
・The battery is automatically tested every the 30th in case of effective.
CONF I GURAT I ON
BATTERY TEST
BATTERY TEST
EFFECT I VE
BATTERY TEST
INVALIDITY
Factory
Setting
〆