Fuji Electric PEN102J1C - Page 56

37
６-１-１３ Remote shut down signal term
Figure ６-14 Remote shut down signal term
It changes into the “Remote shut down signal term” display in pushing the
SET button. Push、▲ button/▼ button when you change the content
display. The content is changed when the SET button is pushed by the
content that changes and it moves to the next item display. Push the ESC
button when it returns to the “Remote shut down signal term” item.
・This setting is a function of installing in the dry contact card of the option.
・UPS shuts down after confirming the set time.
６-１-１４ Manual Bypass
Figure ６-15 Manual Bypass
It changes into the “Manual Bypass” display in pushing the SET button.
Push、▲ button/▼ button when you change the content display. The
content is changed when the SET button is pushed by the content that
changes and it moves to the next item display. Push the ESC button when
CONF I GURAT I ON
RSD S I GNAL TEAM
RSD S I GNAL TEAM
4.5 SECONDS
RSD S I GNAL TEAM
10 SECONDS
RSD S I GNAL TEAM
10 msec
Factory
Setting
〆
CONF I GURAT I ON
MANUAL BYP SET
MANUAL BYP SET
INVALIDITY
MANUAL BYP SET
EFFECT I VE
Factory
Setting
〆