40
changed when the SET button is pushed by the content that changes
and it moves to the next item display. Push the ESC button when it
returns to the “Language” item.
６-１-１８ DC start
Figure ６-19 DC start
It changes into the “DC start” display in pushing the SET button. Push、▲
button/▼ button when you change the content display. The content is
changed when the SET button is pushed by the content that changes
and it moves to the next item display. Push the ESC button when it
returns to the “DC start” item.
・In case of effective, UPS transfers to On-Battery in pressing ON button for three
seconds or more even if there is no utility input.
CONF I GURAT I ON
DC START
DC START
INVALIDITY
DC START
EFFECT I VE
Factory
Setting
〆
To Next Page
Loading...