Fuji Electric PXZ Series - Page 50

22
[Description]
• Key lock is a function not to change
set data accidentally. Parameters SV
and data can be displayed.
• When key lock is released again,
change the setting to release the key
to “0”.
(Note) Key lock comes in 2 types,
one is used to prevent change
of all setting (setting = 1) and
another is used to prevent
change of values other than
SV (setting = 2).
Setting code 0: No lock
Setting code 1: Lock of all settings
Setting code 2: Lock of values other
than SV
Example) Key lock to prevent accidental data change
Key operation Description
Press the SEL key to display P.
Press the SEL key repeatedly until
is displayed.
Press the or key to display
1.
Press the DATA key once.
Current data 0 is displayed.
Press the SV key when you need to
display the operation status display.
After pressing the ENT key, key-
locked data is registred.
Operation will be started with lock
of all settings.
Display
SEL
ENT
SV
DATA
SEL
Key lock (Setting range: 0, 1, 2)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com