36
Example) Altering the unit of measurement input from
°C to °F
Key operation Description
Press the SEL key for 3 seconds,
and P-n1 is displayed.
Press the SEL key repeatedly until
P-F is displayed.
Press the or key to display
°F.
Press the DATA key. Data is
displayed.
Press the SV key when you need to
display the operation status display.
After pressing the ENT key, the data
is registered.
Display
SEL
SEL
SV
DATA
ENT
Selection of measurement input °C/°F
[Description]
• The unit (°C or °F) of temperature
can be selected for temperature in-
put. It has been set according to the
ordering specifications prior to de-
livery from factory. If it becomes
necessary to change it after pur-
chase, the input range (P-SL, P-SU),
alarm value (AL, AH), set value
(SV) and offset (PVOF, SVOF)
should be changed.
The unit of temperature is shown on
the front nameplate. It should also
be changed at the same time.
Related parameter: SV (Page 5)
P-SL (Page 29)
P-SU (Page 29)
AL (Page 9)
AH (Page 10)
9
5
(Note 1)
T
1
(°F) = T
2
(°C) + 32
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
