Fuji Electric SPH Series - Page 129

2-55
Section 2 Programming Languages
8) DS (Delayed and stored)
The action is started only when the step is held active for longer than a preset time. The action repeatedly continues execution
until it is reset by the R qualier. The action is not executed if the step is deactivated before the preset time is reached.
9) SL (Stored and time limited)
When the step is activated, the action is started and its execution is repeated until a preset time is reached. The action is
stopped when the preset time is reached. This control is not affected even when the step is deactivated (differs from the L
qualier in this respect).
The R qualier is used to stop the execution of the action within the preset time.
S001
T001
A
CT1
T004
S005
S001
T001
S005
5s
5s
S001
T001
A
CT1
S001
T001
A
CT1
S001
T001
A
CT1
T004
S005
5s
5s
5s