Fuji Electric SPH Series - High-Speed Pulse Output Setting

3-13
Section 3 System Denition
3-3-7 High-speed pulse output setting
Make settings of the high-speed pulse output that is built in the Advance Main unit as standard.
The following items are set for individual channels (CH0 to CH7): the channel to be used, output mode (“A/B,” “U/D,” “P/R,” “PWM,”
or “PLS”) and output polarity (positive logic or negative logic).
<Setting procedure>

Click the [High-speed pulse output setting] tab on the “Main unit parameter” dialog box to display the following window.

After setting all necessary items, click the [OK] button.