Fuji Electric SPH Series - Page 37

1-28
Section 1 Specications
2) Positioning parameter display %MW1.61610 to %MW1.61769
Address Name Description Attribute
%MW1.61610
Positioning parameter current
value for CH0
Maximum frequency (1 to 200,000 Hz) [L]
R
%MW1.61611 [H]
%MW1.61612 Startup frequency (0 to 200,000 Hz) [L]
%MW1.61613 [H]
%MW1.61614 Stop speed (0 to 200,000 Hz) [L]
%MW1.61615 [H]
%MW1.61616 Acceleration time (1 to 30,000 ms) [L]
%MW1.61617 [H]
%MW1.61618 Deceleration time (1 to 30,000 ms) [L]
%MW1.61619 [H]
%MW1.61620
%MW1.61621
Not used
%MW1.61622 Creep speed (for origin return) (0 to 200,000 Hz) [L]
R
%MW1.61623 [H]
%MW1.61624 LS address (for origin return) (0 to 15) [L]
%MW1.61625 Z-phase signal address (for origin return) (0 to 15) [H]
%MW1.61626
%MW1.61627
Not used
%MW1.61628
Acceleration/deceleration time (for multi-axis control)
(1 to 30,000 ms)
[L]
R
%MW1.61629 [H]
%MW1.61630
|
%MW1.61649
Not used
%MW1.61650
Positioning parameter current
value for CH1
Maximum frequency (1 to 200,000 Hz) [L]
R
%MW1.61651 [H]
%MW1.61652 Startup frequency (0 to 200,000 Hz) [L]
%MW1.61653 [H]
%MW1.61654 Stop speed (0 to 200,000 Hz) [L]
%MW1.61655 [H]
%MW1.61656 Acceleration time (1 to 30,000 ms) [L]
%MW1.61657 [H]
%MW1.61658 Deceleration time (1 to 30,000 ms) [L]
%MW1.61659 [H]
%MW1.61660
%MW1.61661
Not used
%MW1.61662 Creep speed (for origin return) (0 to 200,000 Hz) [L]
R
%MW1.61663 [H]
%MW1.61664 LS address (for origin return) (0 to 15) [L]
%MW1.61665 Z-phase signal address (for origin return) (0 to 15) [H]
%MW1.61666
%MW1.61667
Not used
%MW1.61668
Acceleration/deceleration time (for multi-axis control)
(1 to 30,000 ms)
[L]
R
%MW1.61669 [H]
%MW1.61670
|
%MW1.61689
Not used