Fuji Xerox ApeosPort-V C3376 Administrator's Guide

15 Problem Solving
508
Problem Solving
15
016-508
[Cause] When using the Image Log Control feature, failed to forward the image log to the
server.
[Remedy] Set the forwarding rule for image logs from the server to the machine.
016-509
[Cause] When using the Image Log Control feature, failed to forward the image log to the server
because the forwarding rule for image logs from the server to the machine has not been
set.
[Remedy] Either set the forwarding rule for image logs from the server to the machine, or set
[Transfer Image Log] to [Disabled].
016-510
[Cause] When using the Image Log Control feature, failed to forward the image log to the server
because the forwarding rule for image logs from the server to the machine has not been
set.
[Remedy] Set the forwarding rule for image logs from the server to the machine.
016-511
016-512
[Cause] When using the Image Log Control feature, failed to forward the image log to the server
because the forwarding rule for image logs from the server to the machine has not been
set correctly.
[Remedy] Confirm the forwarding rule for image logs from the server to the machine.
016-513
[Cause] An error occurred in connecting to the SMTP server. Probable causes are as follows:
1)The SMTP server or network may be overloaded.
2)The source port number for SMTP is incorrect.
[Remedy] For 1), wait for a while, and then execute the operation again.
For 2), confirm whether the source port number for SMTP is correct.
016-514
[Cause] An error occurred during processing of an XPS document.
[Remedy] If an error occurred while printing from a driver which supports XPS, print from the
application using another print driver (PCL, etc.).
If an error occurred while direct printing an XPS document (such as ContentsBridge
Utility, E-mail, and Media Print - Text), print using the print driver (PCL, etc.) from XPS
Document Viewer.
Note • XPS stands for XML Paper Specification.
016-515
[Cause] There was insufficient memory during processing of an XPS document.
[Remedy] Take one of the following measures:

Set [Image Quality] to [Standard]

Increase the amount of memory

Print using the print driver (PCL, etc.) from XPS Document Viewer.
Note • XPS stands for XML Paper Specification.
For more information on [Image Options], refer to the help of the print driver.
016-516
[Cause] The Print Ticket included in the XPS document includes an invalid description or a print
setting not supported by the machine.
[Remedy] Check whether there is a problem with the method of using the application that sent the
print job, or with the content of the print instruction.
If your application usage and print instruction are correct, check with the application
manufacturer that sent the print job for operations of the application, not with Fuji
Xerox.
If the error still is not resolved, contact our Customer Support Center.
Note • XPS stands for XML Paper Specification.
016-517
[Cause] There is an error in the content described in the PostScript file.
[Remedy] Print with the PostScript driver. Furthermore, modify ProcessColorModel described in the
PostScript file so that the color mode does not change.
Error Code Cause and Remedy

Fuji Xerox ApeosPort-V C3376 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-V C3376
Category	All in One Printer
Language	English