15 Problem Solving
634
Problem Solving
15
7 Slightly push the booklet staple cartridge
upwards, and make sure that it clicks into place.
Note • Return the booklet staple cartridge until ( )
of the booklet staple cartridge is fitted in
( ) of the booklet unit.
8 Return the booklet unit to its original position.
9 Close the finisher front door.
Note • If the door is not closed completely, a message appears and the machine will remain paused.
If you cannot remove jammed staples even after you perform the above procedure, contact
our Customer Support Center.
To Next Page
Loading...
