Fuji Xerox ApeosPort-V C4476

Copy
125
Copy
3
[Target Area Color] Screen
This screen allows you to select the target color to be used in place of the source colors
specified in [Source Color]. You can select one color from seven preset and six custom
options.
For information on how to set custom colors, refer to "5 Tools" > "Copy Service Settings" > "Custom Colors" in the
Administrator Guide.
1 Select [Dual Color].
2 Select [Target Area Color].
3 Select any color.
[Non-target Area Color] Screen
This screen allows you to select the color to be used in place of the colors other than the
selected source colors. You can select one color from seven preset and six custom options.
For information on how to set custom colors, refer to "5 Tools" > "Copy Service Settings" > "Custom Colors" in the
Administrator Guide.
1 Select [Dual Color].
2 Select [Non-target Area Color].