Control Panel
87
Product Overview
2
24 IC Card Reader (optional) Used to authenticate a user using a smart card.
When you touch the smart card to the IC Card Reader, the machine reads
the user information registered on the smart card and authenticates the
user.
Note • An optional component is required to use this feature. For more
information, contact our Customer Support Center.
• When the machine is in the Power Saver mode, touching the smart card
to the IC Card Reader deactivates the Power Saver mode. However, this
operation does not deactivate the Sleep mode. For more information,
refer to "Exiting the Power Saver Mode" (P.82).
25 Paper clip tray Used for placing paper clips and staples.
No. Component Function
To Next Page
Loading...
Need help?
General
