Fuji Xerox ApeosPort-VII P5021 User Manual

[Connectivity & Network Setup]
149
 [Primary Server Name / Address]
Enter the primary server name or IP address.
 [Primary Server - Port Number]
Set the primary server port number.
Important

Do not use the numbers assigned to the other ports.
 [Secondary Server Name / Address]
Enter the secondary server name or IP address.
 [Secondary Server - Port Number]
Set the secondary server port number.
Important

Do not use the numbers assigned to the other ports.
 [Domain Name]
When you use Active Directory of Windows Server as server, specify the domain name of
Active Directory in [Domain Name].
Important

Enter a realm name in uppercase characters. Otherwise, an authentication error occurs.
 [Server Certificate Verification]
Select whether or not to verify a server certificate.
[LDAP Server / Directory Service Settings]
Configure the directory server and authentication method for LDAP authentication.
You can check the connection to the server by selecting [Connection Test]. Selecting
[Connection Test] > [Print LDAP Comm Report] outputs the report that shows the contents
of protocol of the LDAP communication transmitted and received by the device.
 [Primary Server Name / Address]
Enter the primary server name or IP address.
 [Primary Server - Port Number]
Set the Primary server port number.
Important

Do not use the numbers assigned to the other ports.
 [Secondary Server Name / Address]
Enter the secondary server name or IP address.
 [Secondary Server - Port Number]
Set the secondary server port number.
Important

Do not use the numbers assigned to the other ports.
 [Authentication Method]
 [Direct Authentication]
Uses the user ID and password entered by a user for LDAP authentication.

Fuji Xerox ApeosPort-VII P5021 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-VII P5021
Category	Printer
Language	English