7 Advanced Settings
158
[Accounting Mode]
Allows you to set whether or not to enable the Accounting feature for the following
services:
Print from USB
Print Jobs
The services displayed on the screen vary depending on the device configuration.
When [Enable Accounting] is selected for a service, is displayed on the button of the applicable service
on the Home screen. The display disappears once authorized.
Jobs may be cancelled depending on the "[Receive Control]" (P.165) settings.
[Verify User Details]
Set whether or not to verify user information.
Selecting [Yes] makes [For Print Jobs] available too.
[Customize User Prompts]
Allows you to set the type of user information used for authentication.
Account ID is used for accounting.
[Accounting Login Screen Settings]
[Alternative Name for User ID]
Allows you to change the indication "UserID" on the [Login] screen, which appears when the
login information field on the touch screen is tapped, to another name such as "User Name"
or "Number" as needed.
The name changed is also printed in a report or a list.
[Mask User ID (***)]
You can set how an entered user ID is shown on the screen.
[Alternative Name for Account ID]
Allows you to change the indication "Account ID" on the [Login] screen, which appears
when the login information field on the touch screen is tapped, to another name such as
"Account Name" or "Number" as needed.
This item is displayed when [Network Accounting] is selected in "[Accounting Type]" (P.157).
The name changed is also printed in a report or a list.
[Mask Account ID (***)]
You can set how an entered Account ID is shown on the screen.
This item is displayed when [Network Accounting] is selected in "[Accounting Type]" (P.157).