Emulation
271
Symbol set 208 [0] (Default): Roman 8
[1]: ISO 8859-1 Latin 1
[2]: ISO 8859-2 Latin 2
[3]: ISO 8859-9 Latin 5
[4]: ISO 8859-10 Latin 6
[5]: PC-8
[6]: PC-8 DN
[7]: PC-775
[8]: PC-850
[9]: PC-852
[10]: PC-1004 (OS/2)
[11]: PC Turkish
[12]: Windows 3.1 Latin 1
[13]: Windows 3.1 Latin 2
[14]: Windows 3.1 Latin 5
[15]: DeskTop
[16]: PS Text
[17]: MC Text
[18]: Microsoft Publishing
[19]: Math 8
[20]: PS Math
[21]: Pi Font
[22]: Legal
[23]: ISO 4 United Kingdom
[24]: ISO 6 ASCII
[25]: ISO 11 Swedish:names
[26]: ISO 15 Italian
[27]: ISO 17 Spanish
[28]: ISO 21 German
[29]: ISO 60 Norwegian v1
[30]: ISO 69 French
[31]: Windows 3.0 Latin 1
[32]: Windows Baltic
[33]: Symbol
[34]: Wingdings
[35]: UCS-2
Font size 209 [400] - [5000] (Default: [1200]): 4.00 to 50.00 point
Font pitch 210 [600] - [2400] (Default: [1000]): 5 to 128 line
Form line 211 [5] - [128] (Default: [64]): 6.00 to 24.00 point
Quantity 212 [1] - [999] (Default: [1]): 1 to 999 sets
When the output quantity is specified by a client, that number of copies is printed.
After printing, the number set on the control panel is overwritten with the number
newly specified. However, the number of copies specified from the LPD port will not
overwrite the number set on the control panel.
Image enhance 213 Image Enhancement smoothens the border between black and white, reducing
rough edges, and thus seemingly increasing the resolution.
[0]: Off
[1] (Default): On
HexDump 214 Sets whether to enable a hex dump.
[0] (Default): Off
[1]: On
Draft mode 215 When printing in black and white, prints the portion printed in black by using the
draft mode. This feature is enabled for the entire document.
[0] (Default): Off
[1]: On
Binding 217 [0] (Default): LEF
[1]: SEF
Line termination 218 Sets line termination processing.
[0] (Default): Off
[1]: Add-LF (Appends an LF to CR)
[2]: Add-CR (Appends a CR to LF and FF)
[3]: CR-XX (Appends a CR to LF and FF, and LF to CR)
Default custom
paper size
219 (Short
edge)
Specifies the default custom paper size.
[2100] (Default short-edge value): 210.0 mm
[2970] (Default long-edge value): 297.0 mm
220 (Long
edge)
[0] - [9999]: 0 to 999.9 mm
Parameter Item No. Value
To Next Page
Loading...
Need help?
General
