3 Basic Operations
68
Side-Opening Envelopes
Load envelopes with the flaps closed. Place the print side facing up, and the flaps come at
the right when you face towards the device.
Top-Opening Envelopes
Load envelopes with the side to be printed facing up. The orientation of the envelopes
varies depending on the envelope types (envelopes with or without adhesive glue).
When making prints, set the orientation of the envelope and printing direction from [Paper Settings Wizard]
of the print driver. For more information, refer to the help of the print driver.
When using 162 x 229 mm size envelopes and make printing continuously, the envelope may be pushed out
from the exit tray. Take the already-printed envelope away before starting the next print job.
Self-adhesive envelopes with glue
Load envelopes with the flaps closed so that the top edge (side with a flap) is pulled in
first to the device.
Envelopes without glue
Load envelopes with the flaps open so that the bottom edge (side without a flap) is
pulled in first to the device.
To Next Page
Loading...
Need help?
General
