Fuji Xerox DocuCentre 9000 - When Switch the Machine Off Is Displayed; When Print Output Is Not as You Expected

NetWare
115
Troubleshooting
12
*:Refer to NetWare Online Documentation for configuration and operations.
When "Switch the machine off" is displayed
When print output is not as you expected
The directory tree name is not
configured.
Print out the [Printer Settings
List] to confirm if the tree name
is specified.
Set the tree name.
The context is not set. Print out the [Printer Settings
List] to confirm if the context is
specified.
Set the context.
Connected to a different printer
object.
Use NWADMIN from a computer
to confirm if the correct object is
assigned using the layout
information of the print server.*
z
Use the "CentreWare Utilities"
or "Driver CD Kit" CD-ROM
from a computer to correctly
set the file-server-name/tree/
context/operation-mode.
z
Use the CentreWare Internet
Services from a computer to
correctly set the file-server-
name/tree/context/operation-
mode.
The NetWare port on the
machine is not set to "Enable".
Print out the [Printer Settings
List] to confirm if the NetWare
port is enabled.
Enable the NetWare port.
The file server is down. Search for the file server using
the [Network Computer].
Start the file server.
There is another device on the
network with an identical device
name.
Switch off the machine and use
NWADMIN from a computer to
confirm that the status of the
printer object is "Standby".
Use the "CentreWare Utilities" or
"Driver CD Kit" CD-ROM from a
computer to set a different
device name.
The NetWare port is not
functioning.
Print out [Printer Settings List] to
confirm if the network number is
left to "0000000" (NetWare
server down) if using IPX/SPX. If
using TCP/IP, confirm if the IP
address is left to "0.0.0.0" (static
address unspecified, or the
DHCP server is down).
For the case of IPX/SPX, start
the NetWare server. For the
case of TCP/IP, either set a
static IP address or start the
DHCP server.
Cause Check point Remedy
A NetWare problem occurred. - Restart the machine.
Cause Check point Remedy
The print language of the print
data and the print language
configured on the machine are
different.
Confirm the print language on
the machine.
Match the print language of the
print data and the print language
configured on the machine.
Cause Check point Remedy