Network Setting Items (Port/Protocol) for CentreWare Internet Services
67
Using CentreWare Internet Services
9
6) Set the [Connection Timeout].
7) Select the [On] check box to enable the [DNS Dynamic Update].
11 Set the WINS information.
1) Select the [DHCP] check box if using DHCP for the [Get WINS Server Address].
2) Set the [Primary WINS Server Address].
Note • This item is not necessary if [DHCP] has been specified for the [Get WINS Server Address].
3) Set the [Secondary WINS Server Address].
Note • This item is not necessary if [DHCP] has been specified for the [Get WINS Server Address].
12 Set the Access Control List information.
1) Select the [Enable] check box.
2) Click the [Edit] button. A screen to enter the user name and password will be
displayed.
3) Enter the System Administrator UserID and password into [User Name] and
[Password], and then click [OK].
Note • The default User ID value is "11111" and password is "x-admin".
4) Set the [IP Filter].
5) Set the [IP Address Mask].
6) Click the [Apply New Settings].
A screen to enter the user name and password will be displayed, and then enter
the System Administrator UserID and password into [User Name] and [Password],
and then click [OK].
Note • The default User ID value is "11111" and password is "x-admin".
7) The right frame on the web browser will change to the machine reboot display.
13 Click [TCP/IP] in the [Protocol Settings] folder.
14 Reflect the values as the machine's setting values.
1) Click the [Apply New Settings].
A screen to enter the user name and password will be displayed, and then enter
the System Administrator UserID and password into [User Name] and [Password],
and then click [OK].
Note • The default User ID value is "11111" and password is "x-admin".
2) The right frame on the web browser will change to the machine reboot display.
3) Click [Reboot]. The machine will reboot and the setting value will be reflected.
To Next Page
Loading...
