Fuji Xerox DocuCentre-IV C4475 Administration Guide

Common Service Settings
171
Tools
5
Offset Stacking (Center Tray)
Offsetting means that each set of copies is delivered to the center tray and shifted slightly
to separate it from the previous job. When a set of copies is delivered to the front of the tray,
the next set is delivered to the rear of the tray. Set the offset function for the Center Tray.
Select from [No Offset], [Offset per Set], and [Offset per Job]. When [Offset per Set] or
[Offset per Job] is selected, the machine slightly shifts the output position per set or per job
(print job) respectively.
Offset Stacking (Center Tray - Upper)
Offsetting means that each set of copies is delivered to the center tray and shifted slightly
to separate it from the previous job. When a set of copies is delivered to the front of the tray,
the next set is delivered to the rear of the tray. Set the offset function for the Center Tray -
Upper. Select from [No Offset], [Offset per Set], and [Offset per Job]. When [Offset per Set]
or [Offset per Job] is selected, the machine slightly shifts the output position per set or per
job (print job) respectively.
Offset Stacking (Center Tray - Lower)
Offsetting means that each set of copies is delivered to the center tray and shifted slightly
to separate it from the previous job. When a set of copies is delivered to the front of the tray,
the next set is delivered to the rear of the tray. Set the offset function for the Center Tray -
Lower. Select from [No Offset], [Offset per Set], and [Offset per Job]. When [Offset per Set]
or [Offset per Job] is selected, the machine slightly shifts the output position per set or per
job (print job) respectively.
Offset Stacking (Right Middle Tray)
Offsetting means that each set of copies is delivered to the center tray and shifted slightly
to separate it from the previous job. When a set of copies is delivered to the front of the tray,
the next set is delivered to the rear of the tray. Set the offset function for the Right Middle
Tray. Select from [No Offset], [Offset per Set], and [Offset per Job]. When [Offset per Set] or
[Offset per Job] is selected, the machine slightly shifts the output position per set or per job
(print job) respectively.
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
Booklet Offset
When [Offset Stacking (Center Tray)] or [Offset Stacking (Right Middle Tray)] is set to
[Offset per Set], the paper is output to the tray by being slightly displaced by set. If, however,
[Fold & Staple] is selected for booklet settings, the paper is not output by set.
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.

Fuji Xerox DocuCentre-IV C4475 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-IV C4475
Category	All in One Printer
Language	English